BeroNet BNMO-4BRI - 4 Port BRI Module W/O BFTAdapters

Brand: Beronet
Product Code: BERO-0128
Availability: Please Login

BeroNet BNMO-4BRI is a 4 Port ISDN / BRI module specifically designed to be easily installed on BeroNet VoIP Gateways or Appliances. It enables you to configure each BRI port separately as NT (Network Termination) or TE (Terminal Equipment) mode, adding flexibility to the installation. 

Furthermore, in both modes, each ISDN / BRI port can operate in Point-to-Multi-Point (PMP) or in Point-to Point (PTP) mode. The switching from TE to NT mode as well as Line Termination can be easily set via an easy to use WeB GUI (Jumper Free), making the troublesome jumper repositioning by hand unnecessary. 

The BeroNet BNMO-4BRI module can only be used with Berofix Baseboards having at least the following Hardware Revision:

- Berofix PCI card min. Hardware Revision 1.9
- Berofix PCIe card min. Hardware Revision 1.2
- Berofix Box min. Hardware Revision 2.2

Tip: BeroNet VoIP Gateways support up to 2 BeroNet Modules

You can choose or make any combination from the optionally available BeroNet Modules like:
4 BRI(S0)2 BRI(S0)+2FXS, 1 / 2 PRI4 FXO4 FXS

Specifications:

  • 4 separate ISDN / BRI (S0) Ports
  • TE/NT mode and Line Termination (100 Ohm) per line, configurable for each BRI Port separately, via Web GUI (Jumperfree)
  • Termination Resistors Layer 2 is Q.921 and Layer 3 is Q.931 (EuroISDN DSS1) compatible
  • DSS1 Feature set: CLIP/No-Screening, CLIR, COLP, UUS, MCID, CD, CNIP
  • Q.SIG feature set: CNIP
  • Dimension: 105 x 46 x 9 mm, Weight: < 40g
  • Operating Temperature: 0-70°C
  • CE and TBR-3 compliance (ISDN BRI)

Please Note: The BeroNet BFTAdapter Kit in not included in the package, please order separately.

The BeroNet BFTAdapter Kit includes 4 BFTAdapters. It enables you to connect up to 8 BRI or analog Lines on the four RJ45 ports of a BeroNet Gateway or Appliance. For instance, if you are using a BeroNet device with access to 8 Ports (BRI or Analog), you will need 4 BeroNet T-Adapters to have access to all 8 Ports. Also, the BeroNet BFTAdapter Kit is necessary when 2 BeroNet Modules must be connected to a BeroNet Gateway or Appliance.

 PartnerNET beroNet Modules Datasheet

Specifications
Manufacturer BeroNet
Product Type Module
Technology ISDN-BRI
Warranty 2 Years

Related Products (18)